Two strips of LEDs fading in a complementary manner
9V Battery-operated portable unit
Parts:
R1,R2_______________4K7 1/4W Resistors
R3_________________22K 1/4W Resistor
R4__________________1M 1/4W Resistor (See Notes)
R5__________________2M2 1/4W Carbon Trimmer (See Notes)
R6,R10,R11,R14,R15_10K 1/4W Resistors
R7,R8______________47K 1/4W Carbon Trimmers (See Notes)
R9,R13_____________27K 1/4W Resistors
R12,R16____________56R 1/4W Resistors
C1__________________1µF 63V Polyester Capacitor
C2________________100µF 25V Electrolytic Capacitor
D1-D4 etc._________5 or 3mm. LEDs (any type and color)
See Notes)
IC1_______________LM358 Low Power Dual Op-amp
Q1,Q2,Q4__________BC327 45V 800mA PNP Transistors
Q3,Q5,Q6__________BC337 45V 800mA NPN Transistors
SW1________________SPST miniature Slider Switch
B1___________________9V PP3 Battery
Clip for PP3 Battery
This circuit operates two LED strips in pulsing mode,
i.e. one LED strip goes from off state, lights up
gradually, then dims gradually, etc. while the other
LED strip does the contrary.Each strip can be
made up from 2 to 5 LEDs at 9V supply.
Tidak ada komentar:
Posting Komentar